Truly Outstanding Embroidery Effects!
Thick, raised monograms, three-dimensional patterns – embroideries made with PUFFY will stun everyone! The embroidery design is simply satin stitched over the foam, for creating the enhanced 3D effect, giving caps, promotion wear and outerwear a completely new touch.
Processing Recommendations
Place PUFFY on the fabric to be embroidered and attach it with adhesive spray KK, if needed.
Satin stitch your design. The machine needle penetrates the foam during stitching.
A double stitch density instead of the standard setting is essential for completely covering and encasing PUFFY during stitching.
Use satin stitches, not fill stitches. The wider the satin stitch, the stronger 3D effect will be achieved! Step stitches will destroy the foam.
Choose a PUFFY colour to match the embroidery thread or base fabric.
A needle with SES point will perforate PUFFY better than needles with sharp points.
An extremely strong 3D effect can be achieved by using two layers of PUFFY on the base fabric. If needed, bond it with an adhesive spray.
Technical Information
Material:
100% polyethylene
Available in 2 densities:
PE 20: soft, highly suitable for outerwear
PE 10: harder, for caps and logos
Make-up:
Sheets of 40 x 30 cm, thickness 3 mm
Tolerances: thickness may vary +/- 10% depending
on production processes.
Colour range:
PE 20: available in white and black
PE 10: available in white and black
Special sample kits:
The 2 shades of PE 20 and 2 shades of PE 10
with samples sized 20 x 30 cm are included in
a handy hinged box.
Dispatch and packing size:
10 sheets per packet
